TFV16 : a clearomizer powerful and elegant
Smok surprises the vapor in search of excitement extra with the release of his TFV16. This clearomizer surprised as much by its dimensions that by its power. With a length of 64.5 mm and a base of 27 mm in diameter, it weighs 94 g vacuum and up to 100 g when it is full. With its wide tank, it allows a mixture of direct-DIY e-liquid. The Pyrex glass Bulb has a capacity of 9 ml for large clouds are exceptional. Aesthetic side, the TFV16 presents the same features as its predecessors : sculptures protruding, spirit, metal, etc, Its drip-tip to owner is in resin measuring 16 mm wide, complete with a raised base for convenience.
It is by its dimensions that the clearomizer TFV16 of Smok is having a sensational in the world of vape. Classified subohms, it is characterized above all its power. Recommended for use with e-liquids thick (VG>70 %), this clearomizer provides vapor clouds by direct inhalation to 100 %. Designed to fit the resistors in Mesh, this model of Smok revolutionized the world of mods powerful. Comfortable and secure, TFV16 requires great resources for optimal use. It is mainly reserved for use with a mod which the maximum power is 120 W
To be at the height of its dimensions, the clearomizer TFV16 embarks resistances thoughts to provide a vape high and strong in every sense. All the features are developed to allow the TFV16 to meet all of the requirements of vapor. Its resistors are fitted with a connection at the circular base. They produce an increased responsiveness thanks to the strips of Mesh, expressly chosen for their great width in order to ensure an amazing effect.
In more precise, here is what the clearomizer TFV16 in the stomach with its two resistors. Its resistance TFV16 Mesh a value is 0.17 ohm pre-installed is characterized by its strip of 7 mm diameter to a power of around 120 W. The clearomizer allows for direct inhalation and big clouds with this potential. The second resistor to a value of 0.12 ohm is composed of two strips (Dual Mesh) that is compatible with e-liquid, Full VG. It requires between 80 and 160 W, although 120 W are recommended. Of course, the e-thick liquids with a high rate of vegetable glycerin (> 70%) are always advised to take maximum advantage of the potential of the clearomizer TFV16.
With this clearomizer exception, Smok reserve to the vapor of amazing sensations. Catch of the airflows is promising with its dimensions of 14 x 2, 6 mm, that can brew a large volume of air. However, the manufacturer has decided to offer the vapor to the choice of air flow they want. In fact, a simple pivoting of the rotary dial allows you to reduce the inlet airflow.
Airflow adjustable, size extralarge, direct inhalation, filling from the top... it all comes together for an experience of vape new with TFV16 of Smok. For vapor advanced, this clearomizer is equipped with a tank Pyrex 9 ml. Its filling system is designed to optimize the use : top-cap, the swivel is locked. It opens with one hand via the button and the pull tab, anti-seeps placed below ensures a refined look at the clearomizer.
Although gigantic, the TFV16 of Smok repeats the same procedure of replacement of the resistors. The steps are so classic. Just unscrew the base and the top of the clearomizer to remove the resistor wears out. For this, it is necessary to unscrew it from the tank (by the base or the summit). Then, it is necessary to place and screw the new resistance in the base and then point to the bottle on the openings of the resistance for the soak. With a good boot, the vapoteur avoids burning the resistance to the first use with the new resistance. He must then screw back in and refill the tank. The vapoteur can fully enjoy his or her clearomizer in the ten minutes following the installation of the resistance.
The pack TFV16 of Smok includes 1 clearomizer of 9 ml, a spare tank (Pyrex right), 1 resistance pre-installed (Mesh 0,17 ohm), 1 resistance (Dual Mesh 0,12 ohm), 1 vape-band integral protection (silicone) and 1 kit of spare parts.
Géant restitutions des saveurs parfaites, par contre légère fuite au niveau de l'air flow, peut être du à la condensation, pas de souci si entretien rigoureux après chèque fin de réservoir
Anonymous customer published the 15/11/2020 following an order made on 29/10/2020