How do his eliquide : DIY

Thanks to the DIY (Do it yourself = do it yourself), you can now make your own recipes e-liquid. There is nothing more rewarding than to create one's own, isn't it ?
You have at your disposal a varied catalogue of flavours to satisfy your taste buds throughout the year. Add to that your basic nicotiné or not, your booster (if you want) and voila !

"The ingredients"

A neutral base

(VG/PG) - 100ml

Aromas

one or more

An additive

one or more (optional)

Boosters

vials 10ml with 20mg/ml

"Hardware"

A large syringe

ranging from 10ml to 30ml

A small syringe

to prepare the flavors

A vacuum flask

10ml, glass or PET

A pair of gloves

latex - Protection

A vacuum flask

100ml

A pair of glasses

Eye Protection

"ATTENTION"

Before all things, it will be necessary to wash hands well and work on your DIY on a support of a clean and preferably sterile. Make sure you work your eliquide out of the reach of children.
The base and the base nicotiné as well as the boosters and must be handled with caution. It is important to use protective eyewear and latex gloves.

1 • PREPARING YOUR BASE NICOTINÉ

If you already have your basic nicotiné, you can skip this step. If you have just acquiérir a pack to create your base nicotiné, or that you don't have one, follow the following steps :

Boosters

vials 10ml with 20mg/ml

A vacuum flask

100ml

A neutral base

(50/50) - 100ml

A pair of glasses

Eye Protection

A pair of gloves

latex - Protection

1) use a neutral base (50/50 and 100 ml in this example)

2) Attention : the base and the base nicotiné as well as the boosters and must be handled with caution. It is important to use protective eyewear and latex gloves.

3) Take with you an empty bottle plastic 100ml

4) please Bring with you your boosters of nicotine (20mg/ml, vial of 10ml)

5) Pour your boosters of nicotine and your neutral base in your empty bottle, a few examples :

- for a rate of nicotine of 2mg, pour a vial of 10ml of booster 20mg in your empty bottle of 100ml, and 90 ml of neutral base VG/PG

- for a nicotine levels of 4 mg, pour two vials of 10ml booster 20mg your empty bottle of 100ml and 80ml of neutral base VG/PG

- for a nicotine levels of 6mg, pour three vials of 10ml booster 20mg your empty bottle of 100ml, and 70ml of neutral base VG/PG

- for a nicotine levels of 12mg, pour six vials of 10ml booster 20mg your empty bottle of 100ml and 40ml of neutral base VG/PG

2 • DEVELOPMENT OF YOUR E-LIQUID

If you already have your basic nicotiné, you can skip this step. If you have just acquiérir a pack to create your base nicotiné, or that you don't have one, follow the following steps :

Aroma

one or more

Additives

one or more (optional)

A vacuum flask

100ml

A basic nicotiné

the one prepared in the previous step

A pair of glasses

Eye Protection

A pair of gloves

latex - Protection

• Bring you your new empty bottle (in this guide, we'll take a glass bottle of 10ml), and with the aid of a pipette or a syringe, pour the equivalent of 8ml of your base ready to use in your bottle is empty (cf : the method of realization of a basic nicotiné above).

• Attention : the base and the base nicotiné as well as the boosters and must be handled with caution. It is important to use protective eyewear and latex gloves.

• After having taken knowledge of the number of drops required to flavour present on each product sheet, add the number of drops recommended in your preparation. It will be necessary to shake vigorously the bottle of flavoring before you include it in your preparation.

• Add your additives (optional. Should not dépasser1 to 3% of your preparation)

• Before you leave to rest your preparation for maturation of the aromas, shake it energetically to your preparation about 30 seconds.

• Once your preparation is completed, it will be necessary to clean your work surface, wash your hands and change clothes (in case of micro splashing), to throw away your latex gloves previously wrapped in a plastic bag or paper disposable and clean your goggles.

• Don't forget to write out your recipe, name, sign-in to your vial the nicotine levels of your preparations, and even share your recipe on https://www.vapovor.com/recette/ J

3 • THE MATURATION

Maturation is the final step in the preparation of your eliquide. It allows, in a temporary way, to develop the flavors within your preparation. Each type of flavours have their imperatives maturation time :

• 1 single fruity aroma : 0 to 5 days

• Several fruity flavors : 3 to 7 days

• Aromas, vanilla, spices, coffees, mints, anise : 1 to 2 weeks

• Flavours gourmets : 2 to 3 weeks

• Aroma classic : a minimum of 2 weeks.

Optimize the maturation of your preparation by shaking once per day vigorously for 30 seconds.

Very important : The time of ripening varies depending on the database used. The higher the VG (vegetable Glycerin), the longer the maturation time will be long.

Once the maturation period is complete, your eliquide will be ready to be tasted.

4 • SOME TIPS

• If you are a beginner in DIY, prefer the use of a single flavor before considering more complex mixtures.

• The additives are optional. If you want to incorporate additives in your preparation, please ensure that all of your additives do not exceed 1 to 3% of your preparation complete. The additives are very powerful !

• Don't forget to stick a label on the bottle of your preparations (dosage, flavors, nicotine levels, completion date ...)

• Choose preparations 5 ml in vials of 10ml, this will allow you to later adjust the dosage of flavours, or as needed basis.