search
You don't smoke? Do not vape!GeekVape
P Subohm Tank Geekvape
The P Sub Ohm Clearomizer from Geekvape offers an improved version of the famous Zeus Tank. Specifically designed for the fans of direct lung (DL) draw, the P Sub Ohm easily adapts to the most imposing boxes and mods in the market thanks to its dimensions of 26 mm in diameter and 59 mm in height. The brand's signature is found with its top airflow, thus preventing potential leaks. This clearomizer has an impressive capacity of 5 ml and is easily filled from the top, thanks to a widened opening and simple-to-replace mesh coils.
Geek Vape provides you with Z Series coils, both efficient and durable, made of mesh and available in 0.4 and 0.2 ohm, for a clean installation. It is also possible to change the mesh coil without needing to empty the tank beforehand.
The P Sub Ohm from Geek Vape incorporates an innovative airflow system, equipped with three air intakes and designed for a direct inhalation. It is ideal for use with e-liquids based on high concentration vegetable glycerin, thus guaranteeing optimal vapor production (a VG rate of 70% or higher is recommended). This device offers exceptional flavor and intense vaping.
The P Sub Ohm Clearomizer is manufactured by Geek Vape.
Please note that the P Sub Ohm Clearomizer is not compatible with the Z Series 0.25 ohm coil.
- New Sub Ohm Clearomizer
- The god of vaping has struck again
- Intense vaping with big flavorful clouds
- A double chamber tank with 5ml of liquid
- Three-entry airflow
- Airy vaping
- Leak-proof system
- Coils: P Series
Accessories
Geekvape is back in force with a high-performing and robust clearomizer, the P Sub Ohm Tank, intended for DL vape enthusiasts. This clearomizer stands out with its impressive dimensions of 26 mm in diameter and 59 mm in height, a straight tank with a capacity of 5 ml and an airflow located at the top to prevent leaks.
The P Sub Ohm Tank establishes itself as an essential reference for vapers in search of dense vapors and exceptional flavor restitution thanks to the included Mesh Z resistances.
The P Sub Ohm Tank has been designed to offer powerful vape, visible in its design. Bearing the name of Poseidon, the Greek god of the sea, Geekvape has added extra protection to the P Sub Ohm with an innovative design. The new clearomizer from Geekvape is thus better protected against shocks thanks to the airflow ring separating the two tanks.
We find a 810 drip tip for voluminous vapor clouds and a triple airflow, fully adjustable, preventing leaks while offering a flavorful and vapor-rich vape.
Capacity of the Geekvape P Sub Ohm Tank Clearomizer:
With its 26 mm diameter and its 59 mm height, the P Sub Ohm Tank clearomizer offers a appreciable capacity of 5 ml thanks to its straight tank. This capacity is suitable for the provided Mesh resistances, offering excellent output and a notable lifespan.
The clearomizer is filled from the top by unscrewing the top cap. The new circular opening prevents any risk of e-liquid rejection.
Filling the P Sub Ohm Tank clearomizer:
- Unscrew the top-cap
- Fill the tank through the side opening of the tank (not in the center)
- Close the top-cap
- Wait 15 to 20 minutes for the complete priming of the resistance during first use
The installation of the resistance is quick and simple with the P Subohm Tank. The resistance is made of Mesh for an extended heating surface and exceptional flavor rendering.
With the P Sub Ohm Tank clearomizer, you will receive:
- Z0.2 Mesh 0.2 Ω Double coil: to be used between 70 and 80 watts.
- Z0.4 Mesh 0.4 Ω: to be used between 50 and 60 watts.
The P Sub Ohm Tank clearomizer is not compatible with the Z Series 0.25 ohm resistance.
Changing the resistance of the P Sub Ohm Tank clearomizer:
- Unscrew the base of the clearomizer
- Remove the resistance
- Insert a new resistance between the tank's wedges
- Close the bottom of the clearomizer
In short, the Geekvape P Sub Ohm Tank clearomizer is a powerful and reliable solution for DL vape enthusiasts. Its imposing design, its 5 ml capacity, its superior airflow and the included Mesh Z resistances make it a must-have choice for vapers in search of performance and a dense and flavorful vape experience.
Comes with:
- 1 x P SUbohm Tank
- 1 x Pyrex
- 1 x Z Series Resistance
- 1 x Manual
Features:
- Clearo: Sub ohm
- P series resistances
- 5ml tank
- Adjustable airflow
Data sheet
- Brand
- GeekVape
- Capacity
- 5 ml
- Inhalation
- Aerial
Direct - Air Flow
- Adjustable
- Origin
- China
- Air arrival
- From the bottom
Same brand products
The P Sub Ohm Clearomizer from Geekvape offers an improved version of the famous Zeus Tank. Specifically designed for the fans of direct lung (DL) draw, the P Sub Ohm easily adapts to the most imposing boxes and mods in the market thanks to its dimensions of 26 mm in diameter and 59 mm in height. The brand's signature is found with its top airflow, thus preventing potential leaks. This clearomizer has an impressive capacity of 5 ml and is easily filled from the top, thanks to a widened opening and simple-to-replace mesh coils.
Geek Vape provides you with Z Series coils, both efficient and durable, made of mesh and available in 0.4 and 0.2 ohm, for a clean installation. It is also possible to change the mesh coil without needing to empty the tank beforehand.
The P Sub Ohm from Geek Vape incorporates an innovative airflow system, equipped with three air intakes and designed for a direct inhalation. It is ideal for use with e-liquids based on high concentration vegetable glycerin, thus guaranteeing optimal vapor production (a VG rate of 70% or higher is recommended). This device offers exceptional flavor and intense vaping.
The P Sub Ohm Clearomizer is manufactured by Geek Vape.
Please note that the P Sub Ohm Clearomizer is not compatible with the Z Series 0.25 ohm coil.
- New Sub Ohm Clearomizer
- The god of vaping has struck again
- Intense vaping with big flavorful clouds
- A double chamber tank with 5ml of liquid
- Three-entry airflow
- Airy vaping
- Leak-proof system
- Coils: P Series
